How To Fix A Broken Fishing Rod?

Today we will discuss different methods of fixing your broken rod and how to prevent this from happening in the future.

The most common types of fishing rods are Fiberglass and Graphite. These two materials make up most rods today, and each has its distinct advantages and disadvantages; however, they share something in common: both of them can be fixed if they break during use.

Fiberglass:

Fiberglass is a durable material that weighs less than graphite, making it easier for some anglers to cast. If your fiberglass rod breaks, you will need epoxy and a piece of wood. First, epoxy the broken pieces together. Make sure you've sanded all broken edges before applying the epoxy. After your rod is glued back together, secure the two ends with the block of wood and let it dry for about 24 hours. Once your new fiberglass rod has cured (dried) remove the string and weight; then use sandpaper to smooth out any rough edges on your newly repaired fishing rod.

Graphite:

If you go fishing often, it might be worth the extra effort to learn how to fix your broken graphite rod since they are more expensive than fiberglass. You will need an epoxy specifically made for graphite; It can find at most local hardware stores or hobby shops. Epoxy the two broken pieces together and secure them with a rubber band, then let dry for 24-48 hours depending on epoxy used. Once your new rod has cured, remove the rubber band and lightly sand any rough edges you may have missed during assembly.

How To Prevent Your Rod From Breaking?

• Don't put too much stress when reeling in a fish
• Make sure not to apply so much pressure when fighting a fish that you bend your fishing rod in an "S" shape.
• Keep your hooks sharp and replace them with barbless ones.
• Purchase a good quality fishing rod case to protect rods when you want to travel or go from spot to spot.

How To Replace The Guide On The Fishing Rod?

• Guides are an essential part of a fishing rod as they help control the casting and the line.
• If one of your guides breaks, you can replace it with a new one as long as you have the right tools.
• The first step is to remove the old guide from the fishing rod. Use pliers to do this; make sure you grip the guide tightly and twist it off.
• Next, take the new guide and place it in the correct spoton the fishing rod. You will need to apply some epoxy to hold it in place; use a small brush to do this.
• Once the epoxy has dried, use sandpaper to smooth out any rough edges.
• Then, string the fishing rod to ensure you have everything is in place correctly.
• Finally, use heat shrink tubing around the guides for added protection.

How To Replace A Fishing Rod Tip?

• Tips are the most fragile part of any fishing rod; they are constantly getting snagged on rocks or other objects while out on the water, which causes them to break often. Once one tip has broken off your fishing rod, it is time to replace it with a new one. It can do it by purchasing new parts online or at your local hardware store; all that is required is epoxy and sandpaper. First, take off the old tip that you want to remove (if you're going to keep the senior guide and tip, that is okay as well).
• Next, use pliers to grip and twist the old tip, then sand down any rough edges. If you want to use a new guide with your news tip, now would be the time to apply epoxy and secure it in place; let dry for about 24 hours. To glue your new tip on, all you need to do is mix up some epoxy (high-quality epoxies work best, but any will do) apply it to the end of your fishing rod where you want your new tip to go; make sure not too put too much, or it will ooze out and make a mess! Once fully coated, insert your new tip into place and hold until set (it only takes a minute for the epoxy to dry).
• If you are satisfied with your new fishing rod tip, remove any excess epoxy that might be on it, then lightly sand down any rough edges. Next, string the fishing rod to ensure everything is in place correctly, and finally, use heat shrink tubing to protect your newly installed tip.

How To Replace A Fishing Rod Sleeve?

• If you have created an entirely new pole by replacing your old broken one or fixing up rods that belong to other people, this is how to properly replace a fishing rod sleeve.
• You will first need heat shrink tubing; cut off about 1 afoot of it, depending on how much you need each time. Next, you will need to cut a slit in the right spot on your fishing rod so that you can insert the tubing.
• Use a knife as it is sharp enough to cut through any the material you may have easily. Just be very careful not to injure yourself!
• From here, all you have to do is slide the tubing into place and use a lighter or some matches to shrink it down tightly around your fishing rod.

How To Repair A Fishing, Rod Blank?

• If this is attempted before epoxying, there is a chance of breaking your new blank while repairing an old broken one. The best way, if possible, is to purchase a new fishing rod blank instead of trying to fix up an older one because it can be tricky and dangerous--depending on how badly your old blank is broken.
• When fixing up a fishing rod blank, you will need to use a grinder or sander so that you can cut away any jagged areas. From here, the best way to go about this with epoxy; make sure to clean both surfaces (the new blank and old one) before applying the epoxy.
• Once the epoxy has dried, affix string to two of the most common spots on either end of your fishing rod; this will help hold everything in place, while it dries 24 hours later.
• After everything has dried for 24 hours, remove any excess epoxy using sandpaper, then repeat step 4 by stringing your newly repaired fishing rod and allowed an additional 24 hours for it to dry.
• Once your freshly restored fishing rod blank is finished, remove any excess epoxy using sandpaper, and you are all set to go fishing once again!